Hi guys, in one of my two Exiges I’m struggling to find a problem with the crank sensor and I found that there should be a problem with wiring. To locate the problem it I’m looking for the rear bulkhead connector pinout but I did not find anything in the net. Is some of you able to help me? chee…

Guys many thanks. It helped me. After checking the connector I noticed that one pin was not as long as the other. This made an unsafe contact. After repositioning the pin the sensor was ok. How I managed to find the source of the problem? The car was cranking but not starting. I have an Emerald …

Rear bulkhead connector pinout

The Oily Bits S1 Specific Topics

C8LGY 7 July 2023 23:20 2

Pins 46 & 47 on the wiring diagram, which ties in with the list in this thread:

The 47k resistor is in the loom, fairly close to the ECU connector.