Hi All,
VHPD Engine, 37000 miles,
7000 of those since rebuild.
Replaced :- Big End Bearings, Main Crank Bearings, Liners, Newer Type Oil Rail, Piston Rings, Head Bolts etc.
Head was stripped and valves/combustion chambers/ports cleaned, followers re-shimmed, Block was machined to ensure 5 thou liner protrusion.
Has a single vernier fitted to get 110/130 timing, and has been run in my elise using an emerald.
Comes complete with Janspeed manifold, lightened Flywheel(standard VHPD), Titan Throttle bodies and Carbon Fibre airbox. Plus Coil pack.
Mocal Oil Cooler currently still attached (was in o/s of elise near side scoop, reckon it could go in the same position of an exige if you wanted addition oil cooling � with a bit of plumbing!)
CR gearbox also avalable if required.(30K)(it’s not with me at the moment but is available)
In use it feels great, and has been thouroughly warmed up before using higher revs. Temperature’s always been bang on regardess of how it’s been driven (2 1/2 trackdays since rebuild).
Offers… depending on if you want the gearbox or not?
PM me for any questions or info.
Cheers
Joff
p.s. I’ve got an Emerald that I’ll be looking at selling seperately