Reverse light switch

The Oily Bits S1 Specific Topics
1

Hi all,

I’ve just fitted the reverse light switch from my old PG1 to my new Quaife box. I didn’t pull the engine out so I didn’t disconnect the wiring for the switch.

Now, the switch has 2 bullet connectors on it (one male, one female) and I can’t find a corresponding connection in the loom to hook them upto. I’ve plenty of unused plugs (for things not used or not hooked up yet) but I can’t seem to find where this plugs in.

Is the connector on the engine loom, the rear clam loom or the main car loom? If anyone can have a look and trace where the wire goes and let me know what to look for, it’d be appreciated. :slight_smile:

George.

2

One end goes to pin 24 on the multipin bulkhead connector and the other one goes into the rear light loom - not much help I’m afraid :crazy:

Wire from pin 24 in Green and the wire to the lamp is green/brown

3

Thanks for that… there must be a connector in there somewhere, I just can’t see it. I’ll have to look harder!

4

Andy is a walking Haynes manual!!

“Refiting is the reverse of removal”

I used to hate that bloody statement!!!