…Take a look at any picture of an S1 in the “Owners Cars” section, and you will see two screws at the top of the rear clam, above the door and aft of the roof panel.
Yet in Service Parts List, section 10.08 to be exact, there is no illustration nor reference that these screws exist. Same goes with the Service Notes Manual.
So I lost one, but I can’t find the spec/part number to order another set. It’s pseudo-chromed look will be hard to replace on my own.
Does anyone know if they are the same length and size as the front splitter?
Yet in Service Parts List, section 10.08 to be exact, there is no illustration nor reference that these screws exist. Same goes with the Service Notes Manual.
That may be because the very first Exiges did not have fastners here, but they were introduced on the production line. I thought they were shown in my version of the service manual - but will have to check tonight when I get home. If so maybe you have an early set of manuals and a late car!
It’s pseudo-chromed look will be hard to replace on my own.
Its a stainless set screw. Have you also lost the cup washer that goes with it?
Does anyone know if they are the same length and size as the front splitter? [/quote]
Pesky - Thank you very much for confirming. In this case, I like how Lotus’ “factory floor engineering” re-used the existing fasteners - it only helps us as well.
Meat - want me to buy a collection of fasteners and we’ll split it down the middle?
Thanks for the info Beto. I think I might invest in a copy as its’ a bit of a pain having to look at a copy on a comupter when trying to work on the car.