lotus exige 240r on a simracing game...

General General Lotus Talk
1

Hi,
My name is philippe, I’m passionated by the lotus cars and their technical phylosophy.
I’m love mechanical sports and I’m making a small rally car (Citro�n AX GTi, the mother of the Saxo S1600 Wold champion with Loeb in 2000) but I’m also passionated by simracing.
I want to create the Exige 240r for a race simulation called “driver’s republic”.
Here’s a rendered pic of the car done by “SpiT”, he’s working on the 3D model of the car.
I will work only on the physical part of the car and I need all the technical parameters and values possible to make it the more accurate possible.
I hope you could help me
Here’s what I need :
Chassis :
-precise position of the pickup points of the suspension on the car (points of wishbones fix, points of damper fix)
-position of the steering rack on the car
-position of the wheel in the car
-wisbones dimmensions.
-size of antirollbars and positions

  • …

Gearbox :
-size of every gear and pinions
-final drive ratio
-gearbox wheight
-approximative gearbox position

Engine :
-a real torque curve
-his weight

-each part weight possible
-certainly something else I’ve forgotten.

thanks a lot for all the suuport you could give to me

2

Hello, the link doesn’t work (password req’d) you could be in for a long wait for most of that info as there were relatively few of them produced. Try here http://www.grouplotus.com/car/car_tech_specs.php?id=2 or maybe try getting hold of someone at the factory, thay are normally quite helpfull if you speak to the right person.

3

The link have been edited…

Thanks for the advices
I think a lot of these information are the same than any other exiges, perhaps it could help me also ?