Today I went about measuring up for the front wheels.
I’ll be going with 17 inch by 8.5 inch Braid Forged Five wheels in Matt black to match the rear, with a +15 offset, and keeping the 56.6 centre bore and 4x100pcd.
I’ll be running Toyo R888 tyres size 245/40/17.
I spent the rest of the day working out how to widen the front clam.
These are the results so far…
I should say thanks to Frank as it was his modifications that Junks posted pictures of that I followed 
I would also add the gap to the drivers side as well, or it is going to look a little funky. 
I thought I’d practice on the passenger side first, then once I was confident enough I would do my side
Now you’ve gone and done it…
Fiberglass and epoxy dust ehhhhhhh I hate it. 
Have a look at my buddy John’s work with vacuum baging carbonfiber…
http://www.lotussport.org/viewtopic.php?f=25&t=2&start=60
Air fed mask if I were you …
Have friends with long term health problems through painting/fiberglass work…
God I sound like your Dad lol