can anyone give me the settings so that i can set my tracking ?
Ooooo oooo I can answer one.
From the workshop manual it says :
Front : alignment 0.1mm toe out overall ; + 0.1mm, -0
Rear : 1.2mm toe in each side; + 0.2mm , -0
max.side/side 0.2mm
Hmm? From memeory (although it was only the weekend) that’s not quite what is in the back of the Handbook. Not far out mind.
Ian
Hmm? From memeory (although it was only the weekend) that’s not quite what is in the back of the Handbook. Not far out mind.
Ian
Are we talking Elise or Exige here, chaps?
aha. Exige suppliment says one thing on page 3 (as above) and as below on page 9. So there’s .1mm in it, so you decide I guess
Front : alignment 0.2mm toe out overall ; + 0.2mm, -0
Rear : 1.2mm toe in each side; + 0.2mm , -0
max.side/side 0.2mm
I’m talking the tech data from the back of the Exige handbook (not maint manual).
Ian
Who knows what crazy cut and paste fest the manuals went through. I’d go for 1.5mm as an average