Dyno test

Well the good news is, standard S2 Exiges produce quoted horsepower. We have just gotten around to running a powertest on mine. 188.6 BHP @ 8000 rpm and 134lb-ft torque @ 6800 revs.

So we will commence our tuning programme tomorrow

Cheers

Allan

So we will commence our tuning programme tomorrow

From one of your earlier posts, can we assume that means you’re going to be eating only lettuce for the next weeks?

Sadly I am a bat fastard and will probably remain so. I will look into getting a slightly wider seat.
The car will commence a structured tuning programme for naturally aspirated mods first, then move onto forced induction for stage two, then in early 2007 we will look at forged engine build on the Toyota unit for bigger bhp and also at engine transplants on S2.

Cheers

Allan

Hows the tuning program going its been a month :slight_smile:

We have made limited progress due to client workload. However the Ohlins went in today so at least we are moving forward.
All the pieces are here for both N/A tuning and the turbo install but we are short of man hours to get it done

Cheers

Allan

I look forward to the turbo install :slight_smile:

Initial tests are really positive. Over 280 BHP and 200lb-ft but looks promising for more torque.

Keep you all posted

Allan

Is that just with a new tailbox or have you used a K&N air filter too?

Come on spill the beans, what’ve you done?

FF tubo kit

We ran out of patience so we had a “window” available and just went straight ahead and fitted the turbo kit.

Allan