Carbon Fibre Bits (Bargain)

I am having some parts made up if anyone is interested
I may be able to get the prices down a bit depending on how many units ordered

Carbon fibre Oversills �220 a pair plus p+p
Fibreglass Oversills �120 a pair plus p+p
Carbon fibre Motorsport Front Splitter �230 plus p+p
Fibreglass Motorsport Front Splitter �120 plus p+p
Carbon fibre Exige front splitter �250 plus p+p
Fibreglass Exige front splitter �150 plus p+p

I’d go for a pair of oversills let me know when you want to order.

Would like a picture first so that there is no micommunication. One mans oversill could be anothers side pod.

very interested, only parti am not prepared to chop out of mine for moulding cause i would miss to much track fun.

Those muddy stonechipped bits of fibreglass I sent you not good enough then Dave?

you won’t need to chop out yours they have already been moulded up

oversills are the bits that attach to the sill and front clam behind the front wheels, I will get a photo, unless someone has one on here they would like to post

Lol they were actually in better condition than I expected. I had them repaired and they look like new now, I was having some other bits made up and so got a price for carbon ones too.
I’ll have a price for carbon clams soon aswell

you won’t need to chop out yours they have already been moulded up

oversills are the bits that attach to the sill and front clam behind the front wheels, I will get a photo, unless
has one on here they would like to post

That’s the one’s i was thinking of. Already have them moulded and according to my pricelist the price for a pair in carbon is 75pounds.

This them fitted to my car:

[image]MWEB Homepage]

oversills are the bits that attach to the sill and front clam behind the front wheels, I will get a photo, unless someone has one on here they would like to post

These are the bits in question…

[image]SELOC | Lotus Enthusiasts Club

Thanks have posted a pic of the carbon parts on my car, a better price is available for qty as wel, they are light to ship, we already have a number of other body bits so if anyone needs any please ask and i will gladly try and assist you. With the exchange rate doing it’s thing it really will save costs.

The Rand/Pound exchange rate is on your side Jason
but I’ve already had moulds made up.

you won’t need to chop out yours they have already been moulded up

oversills are the bits that attach to the sill and front clam behind the front wheels, I will get a photo, unless
has one on here they would like to post

That’s the one’s i was thinking of. Already have them moulded and according to my pricelist the price for a pair in carbon is 75pounds.

This them fitted to my car:

[image]> MWEB Homepage> ]

[image]MWEB Homepage

do you have any photos of the part off the car? How difficult are they to fit and how resistant are they to stonechipping?

they are no more resistant to stonechips than the Fibreglass ones. the oversills in the above picture are made from twill carbon fibre which is a cheaper form of carbon fibre because its easier to work with, 2x2 carbon fibre has a square pattern and has a better finish, i’ll have photo’s hopefully by the end of the week

How about some nice bootlids & roof’s Dave??

they are no more resistant to stonechips than the Fibreglass ones. the oversills in the above picture are made from twill carbon fibre which is a cheaper form of carbon fibre because its easier to work with, 2x2 carbon fibre has a square pattern and has a better finish, i’ll have photo’s hopefully by the end of the week

My apologies to Maddog I was under the impression you were going to have the moulds made up, in which case I wanted to save you the mould costs , a thousand apologies also I was referring to my parts pricelist in case anybody assumes I was looking at the same price list as Maddog.

There are many different varieties of carbon and lay up tecniques, yes the ones in the photo are made up as race bodywork because they have been the first to go every time my spoiler has ripped off, in fact they have not even been clearcoated.

they are no more resistant to stonechips than the Fibreglass ones. the oversills in the above picture are made from twill carbon fibre which is a cheaper form of carbon fibre because its easier to work with, 2x2 carbon fibre has a square pattern and has a better finish, i’ll have photo’s hopefully by the end of the week

My apologies to Maddog I was under the impression you were going to have the moulds made up, in which case I wanted to save you the mould costs , a thousand apologies also I was referring to my parts pricelist in case anybody assumes I was looking at the same price list as Maddog.

There are many different varieties of carbon and lay up tecniques, yes the ones in the photo are made up as race bodywork because they have been the first to go every time my spoiler has ripped off, in fact they have not even been clearcoated.

No worries Mate, unfortunately we can’t get them maid over here for a skaif a packet of mielie pap and bunnychow (unless you have been to south africa you’ll not not what these are)

How about some nice bootlids & roof’s Dave??

yes I could have those made up aswell, have you got any lying around in your empire of lotus cars and parts