Used Lotus motorsport rear steel uprights (to fit 2 pot AP calipers on the rear) with bearings and flanges £400.
Fitting kit for the above, top hat bushes spherical bearings and spacers/bolts etc and lower brace bar. (New parts). £100.
2 pairs of AP 2 pot front calipers. (In need of refurb. £100 per pair.
1 pair of rear Brembo calipers. (In need of refurb) £100.
Several Long and short driveshafts with tripod joints (no cvs) varying conditions £offers.
Pair of used front aluminium uprights one with flange (need a good clean up) £200.
Offside rear aluminium upright with wishbone mount, good bearing, drive flange and toe link double shear support bracket £200.
Steering rack, needs a refurb £80.
3 NSF lower wishbones
3 OSF lower wishbones
1 NSF upper wishbone
1 OSF upper wishbone
5 rear upper wishbones
Price depends on condition some very good, some in need of total refurb.
S1 Elise front anti roll bar with alloy clamp brackets. Would need a repaint £40.
Rota slipstream wheel. S1 Elise front size. 15"x 6.5". Freshly powder coated in satin black. £150.
Early S1 Elise blue leather seat bit tatty but useable £80.
Early S1 Elise bare seat shell, was stripping to make a lightweight pax seat when LOT regs required to run a pax seat. Regs then changed before it was finished. £50.
Janspeed sports exhaust, twin round tail pipes, deliver mileage only £150.
OE flexi link pipe, short one for Exige. Flex needs replacing due to small crack. £30.
S2 Elise Rover stainless sports exhaust and sports cat. Twin round chrome tail pipes, twin silencer boxes. Not 100% sure what make it is but look like the Hayward & Scott one in the tech wiki on seloc. £100.
S2 Elise standard exhaust manifold. 6 stud type £75.
S1 Elise rear bare clam. Damaged but easily repairable. £75
S1 Elise bare front clam, dammage repaired but needs finishing. £75.
3 offside rear S1 Elise arch liners
1 near side rear S1 Elise arch liner
K20a Honda bits.
Throttle body inc TPS. £150.
Standard inlet manifold £100.
Std k20 pra ECU. The type you need to be modified to a k-pro £150.
New Honda conversion S1 driveshafts £250.(pair)
Used honda conversion S1 driveshafts with used outboard CV's £150 (pair)
Pictures available by request.
Email [email protected]
If your interested or want any more info.
Cheers Steve.