3D Printing - Lotus Stuff

Keep in touch with fellow enthusiasts.
Post Reply
User avatar
Fonzey
Posts: 1191
Joined: Tue Nov 27, 2018 12:17 am

Not sure if anyone is into 3D printing yet, it's something I'm eager to have a go at once I get a decent enough excuse but I stumbled across this over the weekend as a good resource for sharing Lotus based parts/plans:

https://www.thingiverse.com/groups/lotus-parts/things

Particularly nice couple of parts for people considering the aux air duct intercooler mod for an S2.
wennbom
Posts: 135
Joined: Tue Apr 29, 2014 12:09 pm
Location: South Sweden

Thanks, nice find.
I will definitely download and take a look.

A couple of years ago I got myself a cheap Anet A8 printer at 50% discount. Immediate upgrades were absolutely necessary and that pushed the cost up to maybe 130€ or so, but for the money it's been great.
3D printing is great, but it is still early days. There is a lot of constant fine-tuning of settings to get it right. What works one day doesn't the next - because it is more humid, dry, warm, cold, moon phase, etc etc
I have mostly printed non display items because my printer will create a defect here and there. I've mostly done things like brackets and holders.
ABS has been my material of choice. PLA and also PETG are just not tough enough. There are of course even better materials but my printer can't print those. To be honset it struggles quite a bit with ABS.

I'm now about to replace it with something with higher print quality, larger build space and higher speed.
User avatar
Fonzey
Posts: 1191
Joined: Tue Nov 27, 2018 12:17 am

wennbom wrote: Mon Feb 22, 2021 4:21 pm Thanks, nice find.
I will definitely download and take a look.

A couple of years ago I got myself a cheap Anet A8 printer at 50% discount. Immediate upgrades were absolutely necessary and that pushed the cost up to maybe 130€ or so, but for the money it's been great.
3D printing is great, but it is still early days. There is a lot of constant fine-tuning of settings to get it right. What works one day doesn't the next - because it is more humid, dry, warm, cold, moon phase, etc etc
I have mostly printed non display items because my printer will create a defect here and there. I've mostly done things like brackets and holders.
ABS has been my material of choice. PLA and also PETG are just not tough enough. There are of course even better materials but my printer can't print those. To be honset it struggles quite a bit with ABS.

I'm now about to replace it with something with higher print quality, larger build space and higher speed.
Thanks there's some good info here. Would be interested to know what you go for next.
wennbom
Posts: 135
Joined: Tue Apr 29, 2014 12:09 pm
Location: South Sweden

I mostly print stuff like this.
Car audio build thread in Swedish http://www.bilstereoforum.se/showthread.php?t=37108

Also used it quite a bit to print alignment pieces for my chassis repair jig. If anyone is interested I may have some pictures of that.
wennbom
Posts: 135
Joined: Tue Apr 29, 2014 12:09 pm
Location: South Sweden

The Sidewinder X1 seems like great value at the moment, but of course more money spent = better performance.
Two weeks ago I "needed" a Voron 2.4 or a RatRig V-core 3.....€€€€
Last edited by wennbom on Mon Feb 22, 2021 9:40 pm, edited 1 time in total.
High_octane
Posts: 22
Joined: Tue May 19, 2020 8:25 am

If anyone fancies printing a facelift s2 in 1:18 I would exchange money for one.
User avatar
Type116
Posts: 59
Joined: Fri May 01, 2020 3:18 pm

High_octane wrote: Mon Feb 22, 2021 9:03 pm If anyone fancies printing a facelift s2 in 1:18 I would exchange money for one.
I printed a 40mm long vx220 and it took 2 hours lol
Image
User avatar
Fonzey
Posts: 1191
Joined: Tue Nov 27, 2018 12:17 am

Type116 wrote: Tue Feb 23, 2021 11:07 am
High_octane wrote: Mon Feb 22, 2021 9:03 pm If anyone fancies printing a facelift s2 in 1:18 I would exchange money for one.
I printed a 40mm long vx220 and it took 2 hours lol
With such a blocky shape and all those right angles I think a chisel and a brick would be easier

:lol:
User avatar
Type116
Posts: 59
Joined: Fri May 01, 2020 3:18 pm

Fonzey wrote: Tue Feb 23, 2021 11:08 am
Type116 wrote: Tue Feb 23, 2021 11:07 am
High_octane wrote: Mon Feb 22, 2021 9:03 pm If anyone fancies printing a facelift s2 in 1:18 I would exchange money for one.
I printed a 40mm long vx220 and it took 2 hours lol
With such a blocky shape and all those right angles I think a chisel and a brick would be easier

:lol:
play nice! :lolno: :lolno: :lolno:
Image
Post Reply