Ride height Exige S1 street use

Topics relating to the Lotus Exige S1 (series 1)
Post Reply
ortope
Posts: 105
Joined: Sat Jun 13, 2020 11:40 am
Location: Switzerland

Considering all sort of silent policemen popping up everywhere, what would be the best riding height
for an Exige S1 mainly used on street?

Thank you for your advice.

Adriano :)
# S1 016
tlracer
Posts: 641
Joined: Mon May 26, 2003 11:00 am

Standard is, I believe, 112mm front/122mm rear.

Mine is set to 110mm front, 115mm rear with Ohlins spring rates of 235 lb/in front, 325 lb/in rear.

I try to avoid roads with policemen (real or otherwise) or any other sort of speed humps installed... :thumbup:
winthattt
Posts: 1063
Joined: Fri Feb 12, 2010 4:45 pm
Location: Sunny Derbyshire

I run standard heights, generally it’s fine but the number plate catches on occasion, I have set it a bit lower as an audible warning. Car park exit ramps can have some steep inclines. Going too low could be a problem with the mot brake tests.
ortope
Posts: 105
Joined: Sat Jun 13, 2020 11:40 am
Location: Switzerland

I found this listing:

Image

:thumbup:
# S1 016
Post Reply